<td id="jc9zf"><ruby id="jc9zf"></ruby></td>

  1. <object id="jc9zf"><strong id="jc9zf"><xmp id="jc9zf"></xmp></strong></object>
    <tr id="jc9zf"><label id="jc9zf"><listing id="jc9zf"></listing></label></tr>

       External Heating and Cooling of Lined Pipe and Fittings

      Jacketed Piping

      It is possible to provide a source of heating or cooling to a lined piping system by using jackets around the equipment.  Here the core pipe is completely surrounded by a jacket pipe.  The process material travels through the lined pipe as normal, whilst the heating or cooling medium travels through the outer jacket.

      Jackets typically contain steam, hot water or oil.  These can be operated at temperatures of up to the maximum operating temperature of the lining - 200oC or the required process temperature if lower.  Jackets can also work successfully at cryogenic temperatures, as long as the steelwork is specified appropriately.

      On a straight pipe spool the jacket usually extends almost to the end of the pipe, leaving some room to introduce the necessary vent between the steel tube and the liner.  If the line is to be subsequently insulated such vents require extensions to take them outside the lagging.  Connections to the jacket can be flanged, threaded or whatever the customer specification requires.

      Fittings and Valves can also be jacketed, but it may be that their short length allows the process to remain heated, simply by insulating them.

      The advantages of jacketing are that heat can be applied evenly to the pipe without the danger of localised hot spots, which can lead to localised liner damage or liner expansion, both of which can lead to liner collapse.  Also jacketing allows for a smooth ramp up of temperatures – a useful attribute given the poor heat conducting characteristics of PTFE and PFA.


      Jacketed Pipe Spool


      Jacketed Equal Tee

      Jacketed 90 Degree Elbow


      Steam Tracing

      Direct steam tracing can be used by running a steam pipe alongside the steel tube or fitting outside the liner, securing it with steel strapping and insulating the line.  It is important to limit the temperature to avoid damaging the liner and avoid creating localised hot spots where the trace is in contact with the pipe.

      Fluid Tracing

      As with steam tracing this can be used, more often for closer temperature control or for cooling control.

      Electrical Tracing

      Electrical tracing can be undertaken with heating tapes or cables, often used in conjunction with a heat conducting cement to aid dissipation.  Again this can provide good temperature control, but often a low rate of temperature rise and of course is a risk in certain ATEX zones.

      Contact Details

      Corrosion Resistant Products Ltd
      Todmorden Road
      Littleborough
      OL15 9EG

      Phone: +44(0)1706 756400
      Fax: +44(0)1706 379567
      Email:

       Jacketed Pipe Spool
      Typical Jacketed Pipe Spool

      真人金花游戏